How to install tub and shower faucets

To set up any type of tub and shower faucets, you need access to the pipe joints behind the tub/shower fitting, because the main part of the faucet — the device — is invisible behind the walls. Compared with a faucet, which you can get connected to the supply pipe joints with detachable versatile lines, you must completely link a tub/shower faucet to the pipe joints, usually by soldering. It the device has only one handle, rather than a hot and a cold, you’ll need to make only one gap in the walls for the handle and one each for the tub spout and shower heads.

Install preventing within the creating to back up the bath device. This usually includes a horizontally two-by-four cut to size and nailed to the guys on either side of the device. It must be balanced out from the top side walls by the distance specified in the shower faucets guidelines for the device manage to fit properly once the walls is shut up and the creating protected. Use similar prevents to back up the shower heads and tub spout.

Prepare the device for set up by including plugs as needed to link the plumbing. For example, if the device has women threaded inlt slots, you’ll need to attach a male sweating adaptor to each slot in order to solder birdwatcher pipe joints to the device. Some valves, on the other hand, already have sweating relationships and need no adjustment.


Screw a drop ear shoulder to each prevent you set up for the shower heads and tub spout. Dry-fit pipe joints from the store slots of the device to each shoulder and solder the pipe joints together when everything fits. Screw a short-term 1/2-inch inspired nipple area into each shoulder. The nipple area should be long enough to improve 2 or 3 inches wide past the top side of the walls.

Close up the walls, making a 1/4- to 1/2-inch gap around the device manage and each of the erect nipples.

Install the handle cut, following the company’s guidelines. Common set up includes falling on a cut dish and closing it to the walls with plastic caulk, attaching the temperature limiter and linking the manage with the nails provided.

Unscrew the nipple area from the shower heads shoulder and attach in the bath arm. Tense up it with a band wrench. Slide on the escutcheon that comes with the shower faucets and caulk it to the walls. Then attach on the shower heads.