How to Replace a Bathtub Faucet

Often times leaking bathtub faucets can be set, but if the diverter will no longer power water up to the bath without dripping, it is time for a new faucet. Fortunately, alternative options are wide at local diy shops and via the Internet. The alternative is a simple process and takes less than an hour. Specialised resources are often not needed, but can sometimes make the job easier.

Check beneath faucets for a set connect having the faucets in position. If there is, use a small screw driver or allen wrench to reverse the connect. The faucet should come off easily once the connect is eliminated. If no set connect is present, position the wood made manage of a sort inside the starting of the faucets and strongly convert counter-clockwise. Use the sort to convert until the bathtub faucets can be eliminated manually. Once the faucets is eliminated, the spout nipple area will be exposed.

With the old faucet in side, go to the pluming of store to purchase another one of similar size and design. The control which facilitates the faucets is particularly scaled and so similar measurement can be important. If an in the same way scaled faucet cannot be found, a new spout nipple area can be bought to fit the new faucet. The design of the faucets cannot be changed, however. A slide on faucet (with a set screw) must be changed by a slide on faucet. A connect on faucet, must be changed by a connect on faucet.


Attach the bathtub faucets one convert past finger limited. Do not over-tighten the bathtub faucets as it can fold the spout nipple area. Be especially cautious if the spout nipple area is birdwatcher. If preferred, caulk or plastic combined substance can be distribute around the combined where the faucets satisfies the wall to close the new faucet into position. This is often not necessary, but can be used as a prevention evaluate.

Find wholesale faucets great deals online or sales at home improvement stores FaucetSuperDeal.com